FMS Desktop Trainer Information
Flight Management System (FMS) familiarization, driven by the aircraft’s actual avionics software, supported by the original avionics supplier – Collins Aerospace.
Today’s integrated avionics suites give pilots unprecedented information and situational awareness. The challenge is to keep flight crews current and familiar with the highly sophisticated system to allow them to take full advantage of it without increasing pilot workload.
An effective solution is the Avionics FMS desktop trainer from Collins Aerospace. It uses the same software that is used in the aircraft FMS and display systems. The software has been re-hosted to run in a Windows® desktop computer environment.
Through this desktop reuse of actual aircraft software, your pilots can learn new equipment faster and more effectively, without developing negative habits.
It’s a simple way to enhance aircraft operation safety.
- Important FMS Service Information Letters Published A joint investigation between the FAA and Honeywell identified an insufficient explanation in the Honeywell Pilot Operating Manuals regarding flight plan changes activated while on an arrival or approach. It was determined that due to pilot work load in this.
- Honeywell Primus Fms Pilot Manual. Honeywell primus fms pilot manual - Full Version 4.2.1.5 Primus II or Proline II Radio T Interface General Procedures: a. Primus 1000 Cessna Ultra SDOM SYSTEM DESCRIPTION AND OPERATION MANUAL Citation Ultra The PRIMUS 1000 also has PRIMUS II Integrated Radio System The PRIMUS II.
But the Avionics FMS desktop trainer also saves time and money.
Pilots can use the trainer’s simulated avionics tool for flight pre-planning on their laptop computers. They can save a flight plan on a USB drive and then download it into the aircraft’s Collins Aerospace FMS. This eliminates the time it would take for the pilot to manually enter a flight plan into the FMS while the aircraft is being powered by the generator or auxiliary power unit.
This Special Airworthiness Information Bulletin (SAIB) advises registered owners and operators of the transmission of incorrect information from the Honeywell NZ-2000 and FMZ-2000/IC-615/IC- 800/IC-1080 Primus Epic Flight Management System (FMS) software.
KEY BENEFITS
Honeywell Primus 2000 Fms Manual Transmission
- Pilots can practice with new Collins Aerospace avionics at their own pace
- Aircraft-specific products reduce negative habit formation
- All versions of the Avionics FMS desktop trainer run on Windows 10-based computers
- Enables pre-loading of flight plans, saving time and money
KEY FEATURES
- Looks and operates like the aircraft software, providing 100 percent training fidelity
- Provides virtual optical Control Display Unit (CDU) and Multifunction Display (MFD) formats
THE TRAINING CONTINUUM
We provide an array of training solutions to ensure that our customers get the greatest benefits from their avionics systems. Our training portfolio includes instructor-led and web-based training, to procedure trainers through full-motion flight training devices.
THE IDEAL FMS TRAINING TOOL
A state-of-the-art FMS is one of the most powerful and vitally important components of a modern cockpit. In today’s crowded airspace, it is critical that pilots can accurately interpret and respond to all the information that the avionics system is communicating to them.
It starts by entering a flight plan and performance data to get the most out of the aircraft’s systems. The Avionics FMS desktop trainer enables the pilot to go through the phases of flight, including navigation, V-speeds, engaging the Flight Director and autopilot functions. The Avionics FMS desktop trainer provides virtual avionics features of all the control panels, displays and non-avionics controls such as throttles. Pilots can practice and master all cockpit tasks.
To confirm their data entries, pilots can run a simulation that shows them the flight from takeoff to touchdown.
TRAIN LIKE YOU FLY
Because the Avionics FMS desktop trainer is aircraft specific, the software package you buy is the same as the equipment you have in your aircraft. This greatly enhances the training experience. We offer a desktop solution for Pro Line Fusion®, and Pro Line 21™ avionics suites. Collins Aerospace IFIS simulation is also available on applicable models.
The Collins Aerospace Avionics FMS desktop trainer is available for the following aircraft types:
MADE BY THE PEOPLE WHO MAKE THE AVIONICS
It’s a highly cost-effective solution that enables pilots to virtually train on the software they will use on the aircraft. Pilots can master the skills and knowledge they need to safely and efficiently operate in today’s air traffic control environment.
RECOMMENDED SYSTEM REQUIREMENTS
OPTIONS
Enhanced Avionics FMS desktop trainer – includes all the functions of the standard version, plus:
Touch-screen graphical user interface (GUI)
ILS/VOR navigation-to-navigation transfer
High-performance computer and two touch-screen monitors
Aircraft reposition GUI
Option to add physical avionics hardware such as a CDU, RTU, AFD, MKP or CCP integrated with FMS
Basic Desktop Trainer
| Rockwell Collins Pro Line 21 and Pro Line Fusion Desktop Trainer Functionality |
|---|
| Avionics Training |
| Includes Actual Avionics Software |
| Pilot Side Displays |
| IFIS (Integrated Flight Information System) |
| Communication Radio Operations Procedures |
| Simplified Aerodynamic Flight Model (Zero Angle of Attack) |
| FMS (Flight Management System) Training |
| FMS Familiarization |
| Navigation Database Upgrade Capable |
| Flight Plan Load |
| Export Flight Plan to be Imported onto Aircraft |
| Pre-Flight Avionics Procedures |
| System Flight Planning Procedures |
| Departure Procedures |
| Enroute Procedures |
| Arrival Procedures |
| Approach Procedures |
| Search Patterns |
| Instrument Approaches |
| FMS (Flight Management System) Precision Approach |
| GPS (Global Positioning System) Non-Precision Approach |
| VNAV (Vertical Navigation) Approach |
| LNAV (Lateral Navigation) Approach |
Enhanced Desktop Trainer
| Rockwell Collins Pro Line 21 and Pro Line Fusion Enhanced Desktop Trainer Functionality Options |
|---|
| Avionics Training |
| Includes Actual Avionics Software |
| Pilot Side Displays |
| Pilot and Co-Pilot Side Displays |
| IFIS (Integrated Flight Information System) |
| Communication Radio Operations Procedures |
| Simplified Aerodynamic Flight Model (Zero Angle of Attack) |
| FMS (Flight Management System) Training |
| FMS Familiarization |
| Navigation Database Upgrade Capable |
| Flight Plan Load |
| Export Flight Plan to be Imported onto Aircraft |
| Pre-Flight Avionics Procedures |
| System Flight Planning Procedures |
| Departure Procedures |
| Enroute Procedures |
| Arrival Procedures |
| Approach Procedures |
| Search Patterns |
| Instrument Approaches |
| FMS (Flight Management System) Precision Approach |
| GPS (Global Positioning System) Non-Precision Approach |
| VNAV (Vertical Navigation) Approach |
| LNAV (Lateral Navigation) Approach |
| ILS (Instrument Landing System) Precision Approach |
| VOR (VHF Omnidirectional Radio) Non-Precision Approach |
| NDB (Non-Directional Beacon) Non-Precision Approach |
| Automatic Navigation source switching from FMS to NAV sensor (Nav to Nav Hand Off) |
| Hardware and User Interface |
| Includes Computer Hardware as needed (PC, Video, Router, Laptop) |
| Touchscreen Monitor Interface |
| Enhanced Graphical User Interface for knob rotation, buttons, throttle |
| Instructor Operator Station |
| Basic Reposition aircraft using latitude, longitude, heading, and altitude |
Training Contacts
U.S.A.
Rockwell Collins Avionics Learning Center
Mail Station 153-120
400 Collins Road NE
Cedar Rapids, Iowa 52498 U.S.A.
Registrar Fax: 319.295.1542
Registrar Phone: 319.295.4672
Email
Honeywell Primus 2000 Fms Manual Transmission
- Pilots can practice with new Collins Aerospace avionics at their own pace
- Aircraft-specific products reduce negative habit formation
- All versions of the Avionics FMS desktop trainer run on Windows 10-based computers
- Enables pre-loading of flight plans, saving time and money
KEY FEATURES
- Looks and operates like the aircraft software, providing 100 percent training fidelity
- Provides virtual optical Control Display Unit (CDU) and Multifunction Display (MFD) formats
THE TRAINING CONTINUUM
We provide an array of training solutions to ensure that our customers get the greatest benefits from their avionics systems. Our training portfolio includes instructor-led and web-based training, to procedure trainers through full-motion flight training devices.
THE IDEAL FMS TRAINING TOOL
A state-of-the-art FMS is one of the most powerful and vitally important components of a modern cockpit. In today’s crowded airspace, it is critical that pilots can accurately interpret and respond to all the information that the avionics system is communicating to them.
It starts by entering a flight plan and performance data to get the most out of the aircraft’s systems. The Avionics FMS desktop trainer enables the pilot to go through the phases of flight, including navigation, V-speeds, engaging the Flight Director and autopilot functions. The Avionics FMS desktop trainer provides virtual avionics features of all the control panels, displays and non-avionics controls such as throttles. Pilots can practice and master all cockpit tasks.
To confirm their data entries, pilots can run a simulation that shows them the flight from takeoff to touchdown.
TRAIN LIKE YOU FLY
Because the Avionics FMS desktop trainer is aircraft specific, the software package you buy is the same as the equipment you have in your aircraft. This greatly enhances the training experience. We offer a desktop solution for Pro Line Fusion®, and Pro Line 21™ avionics suites. Collins Aerospace IFIS simulation is also available on applicable models.
The Collins Aerospace Avionics FMS desktop trainer is available for the following aircraft types:
MADE BY THE PEOPLE WHO MAKE THE AVIONICS
It’s a highly cost-effective solution that enables pilots to virtually train on the software they will use on the aircraft. Pilots can master the skills and knowledge they need to safely and efficiently operate in today’s air traffic control environment.
RECOMMENDED SYSTEM REQUIREMENTS
OPTIONS
Enhanced Avionics FMS desktop trainer – includes all the functions of the standard version, plus:
Touch-screen graphical user interface (GUI)
ILS/VOR navigation-to-navigation transfer
High-performance computer and two touch-screen monitors
Aircraft reposition GUI
Option to add physical avionics hardware such as a CDU, RTU, AFD, MKP or CCP integrated with FMS
Basic Desktop Trainer
| Rockwell Collins Pro Line 21 and Pro Line Fusion Desktop Trainer Functionality |
|---|
| Avionics Training |
| Includes Actual Avionics Software |
| Pilot Side Displays |
| IFIS (Integrated Flight Information System) |
| Communication Radio Operations Procedures |
| Simplified Aerodynamic Flight Model (Zero Angle of Attack) |
| FMS (Flight Management System) Training |
| FMS Familiarization |
| Navigation Database Upgrade Capable |
| Flight Plan Load |
| Export Flight Plan to be Imported onto Aircraft |
| Pre-Flight Avionics Procedures |
| System Flight Planning Procedures |
| Departure Procedures |
| Enroute Procedures |
| Arrival Procedures |
| Approach Procedures |
| Search Patterns |
| Instrument Approaches |
| FMS (Flight Management System) Precision Approach |
| GPS (Global Positioning System) Non-Precision Approach |
| VNAV (Vertical Navigation) Approach |
| LNAV (Lateral Navigation) Approach |
Enhanced Desktop Trainer
| Rockwell Collins Pro Line 21 and Pro Line Fusion Enhanced Desktop Trainer Functionality Options |
|---|
| Avionics Training |
| Includes Actual Avionics Software |
| Pilot Side Displays |
| Pilot and Co-Pilot Side Displays |
| IFIS (Integrated Flight Information System) |
| Communication Radio Operations Procedures |
| Simplified Aerodynamic Flight Model (Zero Angle of Attack) |
| FMS (Flight Management System) Training |
| FMS Familiarization |
| Navigation Database Upgrade Capable |
| Flight Plan Load |
| Export Flight Plan to be Imported onto Aircraft |
| Pre-Flight Avionics Procedures |
| System Flight Planning Procedures |
| Departure Procedures |
| Enroute Procedures |
| Arrival Procedures |
| Approach Procedures |
| Search Patterns |
| Instrument Approaches |
| FMS (Flight Management System) Precision Approach |
| GPS (Global Positioning System) Non-Precision Approach |
| VNAV (Vertical Navigation) Approach |
| LNAV (Lateral Navigation) Approach |
| ILS (Instrument Landing System) Precision Approach |
| VOR (VHF Omnidirectional Radio) Non-Precision Approach |
| NDB (Non-Directional Beacon) Non-Precision Approach |
| Automatic Navigation source switching from FMS to NAV sensor (Nav to Nav Hand Off) |
| Hardware and User Interface |
| Includes Computer Hardware as needed (PC, Video, Router, Laptop) |
| Touchscreen Monitor Interface |
| Enhanced Graphical User Interface for knob rotation, buttons, throttle |
| Instructor Operator Station |
| Basic Reposition aircraft using latitude, longitude, heading, and altitude |
Training Contacts
U.S.A.
Rockwell Collins Avionics Learning Center
Mail Station 153-120
400 Collins Road NE
Cedar Rapids, Iowa 52498 U.S.A.
Registrar Fax: 319.295.1542
Registrar Phone: 319.295.4672
Email
Honeywell Primus 1000 Manual
In-Flight Entertainment (IFE) Learning Center
Mail Station: 518-100
1833 Alton Parkway
Irvine, CA 92606 U.S.A.
Registrar Fax: 319.295.1542
Registrar Phone: 319-295-4672
Email
France
Rockwell Collins Toulouse Learning Center
Mail Station 726-100
6 Avenue Didier Daurat
B.P. No. 20008
31701 Blagnac, Cedex France
Fax: + 33 5 61 71 78 87
Phone: + 33 5 61 71 78 10
Honeywell Primus 2000 Xp
Catalogue de Formation
EuMEA Training Catalog
Email
Honeywell Primus 2000 Fms Manual Pdf
Asia Pacific
Registrar Fax: +1.319.295.1542
Registrar Phone: +1.319-295-4672
Email
